Poly carbonate(PC)is widely used to make car headlights lamp, with the characters of easy processing, light weight and flexibility.But its surface strength is low, easy to scratch,easy yellowing.
Spraying a layer of coating will help to improve the surface properties, headlamp coating have good optical and friction properties, and it can meet requirements of long time weather resistance.
Our protection coating has the characteristic of moderate viscosity, light odor, rapid curing speed, strong adhensive force, fullness, high hardness, good performance of abrasion resistance and weather resistance, very suitable for the protective paint of plastic parts, such as PC and ABS.
Headlamp Restoration Kits / Car Headlights Refurbished Tools Renew Kits
One sets of kit includes:
One bottle of repair coating: 800g/bottle or 600ml/bottle
One atomizing cup
Six pieces of sanding paper
Plastic cup cover
Usage instruction of Restoration Kits / Car Headlights Refurbished Tools Renew Kits ?
1. Clean the surface of the lamp with clean towel, and put 2-3 layers of fine paper on the periphery of the headlamps to prevent the car paint from being wrong polished.
Sandpaper introduction: 150 #-180 # severe cracks and scratches are used (generally mild yellow or slightly cracked, do not use) 240# Slightly cracked or yellowish to use (slightly cracked or peeling) 320# slightly yellowing or dealing with the sand paper mark left on 240 # (manual polishing can be directly used by 320# manual grinding) 500 # mainly deals with the sandpaper left by 320 #. 800 # mainly deals with the sand paper mark of 500 #. After polishing, it can be directly used for fumigation repair. If you want to fix it better. You can use 1200 # for a simple grind, but remember, you can use 1500 # or 2000 # to fine polish the headlamps, because the polishing is too smooth and the brightness is not high enough.
2. There are two main methods for the polishing of headlamps. One is the grinding of the machine, and the other way is the manual polishing. In this case, we give you a brief introduction to the manual polishing method. When grinding, must use water, rub water while polishing, change the grinding direction for each set of sandpaper! (for example: 180 sandpaper transverse grinding, after polishing and finishing, 240 # sandpaper will be polished vertically, except on the edge, but the edge must be carefully sanded! And so on, the final sandpaper can be 800 # sandpaper, also can use 1200 # sandpaper, with a paper towel dry the water on the surface of the lamp and the watermark, this time the surface of the headlamp is even and smooth, color white, the color is the same, no coarse sand paper printing no interface, this time you can wait for the headlamp to be repaired!)